SGMAHA5AAA21 AC Servo Stepper Motor , High Precision Servo Motor Industrial

◆Precision Elevating Table is a precision device. Excessive loads and impacts on the table will cause reduction in its accuracy and damages of its
components. Therefore, handle it with great care.
◆Make sure the object surface to be mounted on the table is clean and free from any harmful protuberances.
◆The linear motion rolling guide and ball screws assembled in Precision Elevating Table are lubricated with grease. It is necessary to protect the
inside of the table unit against invasion of dust or foreign matters. If the table unit is contaminated with dust or others, completely remove them
and the contaminated grease and apply new grease.
◆The best way to lubricate Precision Elevating Table varies by operating conditions. In general, every 6 months in normal services or every 3
months when the table reciprocally runs a long distance although the frequency of replacement of grease depends upon the running conditions.
Wipe off old grease and apply new clean grease.
◆Precision Elevating Table is machined, assembled and adjusted with high accuracy. Accordingly never disassemble or remodel it in any case.
◆Do not apply any excessive load or strong impact to the linear encoder.
◆Make sure that the linear encoder surface is free from dirt. If it is dirty, it may not able to detect table positions. In such a case, wipe clean the
surface with clean cloth dipped with ethyl alcohol or the like. Cover the linear encoder with a proper protector when using the linear encoder in a
dusty environment.